NO.1 SUPER EMULSION

Scope:

Berger No.1 Super Emulsion is a top quality distemper. It covers more wall area than any other distempers and is therefore, very economical.

Uses

Berger No.1 Super Emulsion can be used on walls, ceilings, old and new cement plasters, chipboards and hardboards.

Surface Preparation

New surfaces should be rubbed down with stone or sandpaper to remove nibs on the plaster. Previously painted surfaces should be thoroughly sandpapered. All surfaces should then be cleaned using a bristle brush or broom. Always ensure that the surface being painted is dry and free from flaking paint, oil, grease, etc.

Application:

For thinning, mix equal volumes of Berger No.1 Super Emulsion and water. For porous surfaces, additional quantity of water may be necessary for the first coat in order to satisfy surface porosity. All equipment and brushes, etc. must always be cleaned with soap and water immediately after use.

Coverage:

Berger No.1 Super Emulsion covers 12 – 16m2 per litre per coat.

Packaging:

It is available in 3.64 and 14.56 litre pack sizes.

Shade Card

No.1 Super Emulsion