NU Enamel

Scope:

Berger NU Enamel is a good quality enamel for interior and exterior use. It provides protection and decoration to the surface under all conditions. It is a high gloss, highly durable enamel with ease of application.

Uses:

Berger NU Enamel is suitable for both interior and exterior surfaces. It can be applied on prepared, primed surfaces such as wood, metal, cement plaster, asbestos, hardboard, etc.

Surface Preparation:

Ensure all surfaces are free from grease, wax, oil, dirt and rust before applying paint. Loose, blistered or flaking paint should be thoroughly removed by scraping. For priming, Berger Plastron Primer / Red Oxide Primer / Synthetic Undercoat is recommended, depending on the surface.

Application Procedure:

Berger NU Enamel can be applied with brush, roller or spray. To obtain a desired viscosity for brush application, thin with 12-15% of good quality turpentine and up to 20% for spray application.

Drying Time:

Berger NU Enamel dries in 4 to 6 hours under normal conditions and is recoatable after 16 hours.

Coverage:

Berger NU Enamel covers 12 to 16 meter square per litre per coat, depending on surface porosity.

Packaging:

Available in 0.25, 0.91, 3.64 and 14.56 litre packs.