Exterior Texture

Scope

Berger Robbialac Exterior Texture is a high quality water-based texture for exterior use.

Uses

Berger Robbialac Exterior Texture is recommended to be used as exterior coat on concrete, cement and bricked surfaces.

Surface Preparation

New Surfaces

Ensure that the cemented surface is dry, free from dust, oil, grease, salt and mold. All new surfaces must be cured for at least 30 days prior to the application of Berger Water Based Primer.

Previously Painted Surfaces

Remove old paint from the surface completely. Then make sure that the surface is dry, free from dust, oil, grease, salt and mold. Apply Berger Water Based Primer prior to the application of Berger Robbialac Exterior Texture.

Typical Painting System

Cement Plaster Surfaces/ Concrete/ Gypsum/ MDF or Plywood
Berger Water Based Primer       1 coat
Berger Robbialac Exterior Texture       1 coat

Drying Time

Berger Robbialac Exterior Texture dries in 2-3 hours depending upon the ambient temperature.

Coverage

It covers 1 to 1.5 meter square per kg per coat, depending upon porosity of the surface.

Packaging

Berger Robbialac Exterior Texture is available in 20 kg pack size.

Safety Precautions

The paint should be protected from extreme hot and cold temperatures. The container should be properly closed and kept in upright position after use.