Sand Finish


Berger Sand Finish is high quality water-based texture paint which is suitable to create sand like effect and it gives antique finish effect with different look.


This is especially designed for exterior decoration. It is recommended for exterior sand effect for hotels, restaurants, villas, museums, mosques, etc.

Surface Prepapation

All surfaces should be clean, free from dust and dirt. Surface should be prepared by applying Berger Water Based Primer and then apply Berger Sand Finish. Berger Sand Finish should be applied with scrapper. Berger Sand Finish must be mixed well before use. For new surfaces, follow painting system given below.

Typical Painting System

Cement Plaster Surfaces/ Concrete/ Gypsum etc.
Berger Water Based Primer       1 coat
Berger Sand Finish 1 coat

Drying Time

Berger Sand Finish dries in 1-2 hours depending upon the ambient temperature.


It covers 1-2 meter square per kg per coat, depending upon the porosity of the surface.


It is available in 20 kg pack size.

Safety Precautions

The paint should be protected from extreme hot and cold temperatures. The container should be properly closed and kept in upright position after use.