Cataphos Chlorinated Rubber Road Marking Paint

Product Scope

BERGER Cataphos Chlorinated Rubber (CR) Paint is an excellent pavement marking for asphalt and concrete. The product is manufactured according to the quality standards defined under ISO-9001:2008 Quality Management System. This product is quick in drying and is highly durable. It has excellent resistance to abrasion, chemicals, salts and water. It can be applied with or without glass beads.

Product Composition

BERGER Cataphos Chlorinated Rubber (CR) Paint is a blend of specially selected chlorinated rubber resin blended with high quality plasticizers and special extenders and is ideal for Ballotoni glass beads to provide reflection for center or edge lines. Light fast pigments’ incorporation makes the product highly color durable. Product is single pack, ready-to-use and cold cured.

Surface Preparation

The life and durability of a coating is directly related to the degree of surface preparation and suitability of the surface. The following precautions must be taken before application of BERGER Cataphos Chlorinated Rubber Road Marking Paint:

  • Road surface must be free from mud, sand, oil, foreign matter, loose particles and especially moisture. Moisture is a big barrier to adhesion for all types of coatings.
  • For surface cleaning, use wire brush, soft hair brush, air blower or vacuum cleaner.
  • Do not apply the product on very poor grade asphalt / bitumen.
  • While applying on previously painted surfaces, check if the film is in suitable and good condition without the signs of cracking, blistering and peeling. If any of the mentioned defects are observed, old paint film must be removed prior to application.

Storage and Handling Precautions

  • Keep away from heat and spark sources.
  • Keep under shed, away from direct sunlight.
  • Keep the containers closed in storage.
  • Never breathe in dust, mist, gas or vapors from the dry product or the hot-melt.
  • Do not apply during rain/fog/mist/wind or when the temperature is below 5 °C.
  • Use the paint in ventilation.
  • Store below 35 °C for best performance.
  • As long as the bag is firmly sealed and stored under recommended storage conditions, product can be used within 6 months from manufacturing date.

First Aid

In Case of Eye Contact (It may be fatal when the product is in hot-melt condition)

  • Wash with plenty of flowing cold water.
  • Immediately consult a physician.

In Case of Inhalation (If the person feels dizziness or unconsciousness)

  • Remove the person to open fresh air area.
  • Provide artificial breathing if needed.
  • Consult a doctor.

In Case of Ingestion (It may be fatal when the product is in hot-melt condition)

  • Drink plenty of water or milk.
  • Do not induce vomiting.
  • Consult a doctor.

In Case of Skin Contact

  • Wash with plenty of water and soap.
  • Consult a doctor if irritation continues.

Safety Precautions

  • Avoid prolonged and repeated contact with skin.
  • Avoid prolonged inhalation.
  • Never try to ingest the product.
  • Never breathe in dust, mist, gas or vapors from the dry product or the hot-melt.
  • Always use safety items, goggles, mask, gloves or apron for personal safety.
  • Do not use the product in congested or poorly ventilated areas.
  • Never use the empty containers for storage of potable water or edible goods etc.

Stability and Reactivity

  • Material is stable under normal conditions of temperature without going through deterioration or metamorphism for a period of more than 6 months from the date of manufacturing.
  • Direct sunlight, open flame and high temperatures for a longer period of time must be avoided.
  • Material must be avoided to be in contact with acidic or alkaline substances and oily fluids.

All products originating from BERGER Lahore Plant facility are manufactured under a management system independently certified to conform to the requirements of the Quality Management System ISO 9001:2008. The data contained in this publication are based on our current knowledge & experience. They do not constitute the agreed contractual quality of the product & in view of many factors, that may affect processing & application of our product, do not relief processes from carrying out their own investigation & tests.

Spillage Handling

  • Remove all fire sources.
  • Cut-off power supply.
  • Provide full ventilation.
  • Do not wipe the place with solvent.
  • Use wood, sawdust and sand and thoroughly spread on the spilled paint.
  • Gather the mixture, store in some waste drum and dispose off according to local environment regulations.
  • Never throw out the paint in open garbage areas where fire is a norm.
  • If the spillage is in dry powder form, collect with a vacuum cleaner.