Select a colour from the palette, then brush it on the wall
MaxPro is a top quality paint, ideal for interior surfaces. It dries out to a smooth surface and flat finish which is durable and easily washable.
MaxPro the best emulsion paint for imperfect walls can be applied on all prepared and primed surfaces such as walls, ceilings, old and new cement plasters, chip boards and hard boards. Product has excellent coverage and gives a smooth finish.
All surfaces should be clean, free from dust, dirt and loose paint, and should be dried before applying the paint. New surfaces should be sand papered and brushed off using a bristle brush. It should then be coated with 2 coats of Berger Plastron Wall Primer Sealer or Berger Water Based Primer.
MaxPro the best emulsion can be applied with the help of Brush, roller or spray. Berger MaxPro should be mixed with 3-4 litres of water in one gallon of paint before use. Amount of water can be increased for the smooth application of the last coat. Brush and other tools should be washed with water after use.
MaxPro dries within one hour. It will take longer to dry in rainy and cold seasons. However, allow 2-3 hours between coats.
Max Pro covers 13 to 15 m2 per litre per coat depending on the surface porosity.
Max Pro is available in 1, 4 and 16 litres pack sizes.
The container should be protected from extreme hot or cold temperature. It should be properly closed and kept in an upright position after use. In case of contact with eyes, rinse with water and seek medical advice.
Fill out this form and we’ll calculate how much paint you need for your House.