Synthetic Clear Varnish

Scope:

Berger Synthetic Clear Varnish is a top quality alkyd varnish. It has maximum spread and is excellent for making putty.

Uses:

Berger Synthetic Clear Varnish can be used on interior surfaces, where a high gloss varnish or utmost durability is required.

Surface Preparation:

Apply the varnish in good drying conditions which should be as free from dust as possible. Berger Synthetic Clear Varnish may be applied coat on coat. However, before the second coat is applied, the first coat should be allowed to dry thoroughly. When revarnishing, clean and rub down previous varnish coats. Old perished varnish should be stripped with paint stripper.

Application Procedure:

Berger Synthetic Clear Varnish can be applied ready-for-use by brush. For spray, it can be thinned as necessary with mineral or genuine turpentine.

Drying Time:

Berger Synthetic Clear Varnish dries in 3 to 6 hours and can be recoated after 16 hours.

Packaging:

Berger Synthetic Clear Varnish is available in 3 litre and 750 ml packs.