Call Us: 111 237 437 | For Free Color Advisory : 08000-2000 | info@berger.com.pk

  • Home
  • About Us
  • E H S
  • News and Events
  • Careers

Scope

Berger NU Emulsion is a top quality distemper. It covers more wall area than other distempers and is therefore very economical.

Uses

Berger NU Emulsion can be used on walls, ceilings, old and new cement plasters, chipboards and hardboards.

Surface Preparation

New surfaces should be rubbed down with stone or sandpaper to remove nibs on the plaster. Previously painted surfaces should be thoroughly sandpapered. All surfaces should then be cleaned using a bristle brush or broom. Always ensure that the surface being painted is dry and free of flaking paint, oil, grease, etc.

Application Procedure

For thinning, mix equal volume of Berger NU Emulsion and water. For porous surfaces additional quantity of water may be necessary for the first coat in order to satisfy surface porosity. All equipment and brushes, etc. must always be cleaned with soap and water immediately after use.

Drying Time

Berger NU Emulsion dries out in half an hour and can be recoated in 1 hour.

Coverage

Berger NU Emulsion dries out in half an hour and can be recoated in 1 hour.

Packaging

Berger NU Emulsion is available in 3.64 litre and 14.56 litre packs.